Running a full open node on a Linux server
These instructions will explain how to run a full open Beyondcoin node on a Linux server. These are all command line based, so no GUI is required. Ideal to turn your Web Site Server or Email server into a Beyondcoin full node server.
Separate instructions will become available of how to install a node and optionally the wallet on a Linux Desktop machine.
Basic Linux system administration knowledge is assumed and you may need to install additional packages if an error is encountered.
Most Linux distributions are either a Debian (ie Ubuntu) or a Redhat (ie CentOS) variant. Most commands are the same, but where there are differences it will be mentioned.
The server needs at least 4GB of RAM and 40 GB disk space to be able to operate smoothly.
If you are using the minimum of 4GB of memory, it is recommended to have at least 8GB of swap space available. To check the current swap, run the free command.
If you do not have 8GB+ of swap space, you can run the following commands as root user to create a swapfile.
fallocate -l 8G /swap chmod 0600 /swap mkswap /swap swapon /swap
Then verify if the swap has been added.
To make this swap permanent after every boot, we will add the required information to the fstab file:
echo "/swap swap swap defaults 0 0" >> /etc/fstab
If a non-root user does not already exist, create a user name beyondcoin, running the following commands as root user.
useradd -G wheel beyondcoin -m -s /bin/bash
useradd -G sudo beyondcoin -m -s /bin/bash
Set the password for the new user.
Logon as user beyondcoin.
su - beyondcoin
Create a Beyondcoin configuation file
First of all we need to create the Beyondcoin directory for us to put the .conf in:
mkdir -vp ~/.beyondcoin
We will now create a basic Beyondcoin configuration file. As we are running on a server, there is no need for the wallet functionality and as such we will just relay the blockchain:
cat <<EOF > ~/.beyondcoin/beyondcoin.conf daemon=1 maxconnections=300 disablewallet=1 EOF
If you are on a bandwidth-limited data connection, you may want to consider decreating the maxconnections, or alternatively look to increase your data plan to a flat-rate unlimited plan.
Install Beyondcoin software
Execute these commands to retrieve and unpack the Beyondcoin software. If you run on the ARM architecture, you will need to use beyondcoin-0.16.3-aarch64-linux-gnu.tar.gz instead.
cd ~/ wget -c https://github.com/beyondcoin-project/beyondcoin/releases/download/v0.16.3/beyondcoin-0.16.3-x86_64-linux-gnu.tar.gz -O - | tar xz
We can now launch the Beyondcoin daemon (Core Wallet), and it will begin to run as a background process. If you are planning to run as a service (recommended), this step can be skipped and just read on.
Add service file
For Beyondcoin to run as a service and to be able to start automatically upon boot, a service file needs to be installed. Execute the following as root user.
cat <<EOF > /usr/lib/systemd/system/beyondcoind.service [Unit] Description=Beyondcoin's distributed currency daemon After=network.target [Service] User=beyondcoin Group=beyondcoin Type=forking PIDFile=/home/beyondcoin/.beyondcoin/beyondcoind.pid ExecStart=/home/beyondcoin/beyondcoin-0.16.3/bin/beyondcoind-daemon -pid=/home/beyondcoin/.beyondcoin/beyondcoind.pid \ -conf=/home/beyondcoin/.beyondcoin/beyondcoin.conf -datadir=/home/beyondcoin/.beyondcoin -disablewallet Restart=always PrivateTmp=true TimeoutStopSec=60s TimeoutStartSec=2s StartLimitInterval=120s StartLimitBurst=5 [Install] WantedBy=multi-user.target EOF
cat <<EOF > /etc/systemd/system/beyondcoind.service [Unit] Description=Beyondcoin's distributed currency daemon After=network.target [Service] User=beyondcoin Group=beyondcoin Type=forking PIDFile=/home/beyondcoin/.beyondcoin/beyondcoind.pid ExecStart=/home/beyondcoin/beyondcoin-0.16.3/bin/beyondcoind -daemon -pid=/home/beyondcoin/.beyondcoin/beyondcoind.pid \ -conf=/home/beyondcoin/.beyondcoin/beyondcoin.conf -datadir=/home/beyondcoin/.beyondcoin -disablewallet Restart=always PrivateTmp=true TimeoutStopSec=60s TimeoutStartSec=2s StartLimitInterval=120s StartLimitBurst=5 [Install] WantedBy=multi-user.target EOF
Enable the service on boot.
sudo systemctl enable beyondcoind.service
Start the service.
sudo systemctl start beyondcoind.service
Check the log file
tail -f ~/.beyondcoin/debug.log
This should output the current actions or show any error. The initial synchronization of the local block chain can take several hours, but on a decent server will take <2hrs.
If you are behind a router, TCP port 10333 should be forwarded in order run as an open node. See Running a full node for details.
In order to make upgrading to a future Beyondcoin release a simple task, a symbolic link can be created pointing to the current Beyondcoin directory.
cd ~/ ln -s beyondcoin-0.16.3 beyondcoin
In the service file, replace all occurrences of /home/beyondcoin/beyondcoin-0.16.3/ with /home/beyondcoin/beyondcoin/
When it is time to upgrade, simply stop the beyondcoind.service, download and untar the new release, delete and re-create the symbolic link pointing to the new Beyondcoin directory and start the beyondcoind.service.